www.smooth-on.com to get more concrete mold making and casting ideas. Unique mold making process quickly generates 11880 lightweight concrete panels and 1981 posts to form a 3 mile (4.8 km) decorative wall that will provide safe and secure area for a resort in Cancun, Mexico. Lead Engineer, José Hormiga, is a material expert with years of experience matching the right material for a specific job. He chose Smooth-On’s Rebound® 25 brushable silicone to make the molds for several reasons. Rebound® 25 is easy to apply and cures quickly. Molds are used in production the next day. The rubber reproduced the detail of the bamboo perfectly. The detail was subsequently reflected in each and every concrete panel. Rebound® 25 is strong and stretchy so it can withstand the physical stress of demolding hundreds of highly detailed concrete castings. Rebound® 25 also withstands chemical attack from the GFRC. Because finished panels needed to be stained, no release agent could be used. Rebound® 25 rubber releases GFRC castings without a release agent. Right to the Bottom Line; Mr. Hormiga states that Rebound® 25 mold rubber proved to be an excellent investment. The cost of the Rebound® 25 rubber relative to the number of castings taken from each mold was very low. Make It Now! with Smooth-On www.smooth-on.com www.facebook.com twitter.com
hmmm, maybe they could have made the final product out of bamboo XD
Really nice work
Could of made a lot of Fleshlights or attachments for the Humpus masturbator out of that!!!
Interesting material. Too bad the filming took place somewhere that worker protection is not required. Anyone else notice the lack of any safety equipment when they were applying the resin at 4:14? Not even a dust mask and goggles!
Very informative video. One of the best! Thank you.
You could, you’d just need to make sure you have a very stable support shell.
I would recommend checking out our Epoxamite laminating epoxy as well.
This is an interesting process
can you use this stuff for carbon fiber molds? or is it to soft?